PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   Code Help 97 S500 (http://www.peachparts.com/shopforum/showthread.php?t=166568)

mgtd2000 10-05-2006 11:36 AM

Code Help 97 S500
 
I am hoping someone can help this newbie out. I purchased a 97 S500 two days ago and I figured I would give her a tune up and fluid change. After changing the oil, filter, and spark plugs and cleaned the engine bay with water, being careful to cover the MAS intake. I took her for a drive and after 35 miles the "Check Engine" light came on and she started to miss and sputter. It won't go above 4300 RPM's. I took it to the autostore and they retrieved the following codes P0300, P0304 and P1519
I then came home and change plug number 4 - No luck, still runs the same. Could it be the MAS?

Thanks
Kevin

whunter 10-05-2006 11:54 AM

OBD2 DTC codes Mercedes-Benz Diagnostic Trouble Codes for 1996+ models
 
Mercedes-Benz Diagnostic Trouble Codes (DTC) for 1996+ models

mbdoc 10-05-2006 11:56 AM

Try switching the coil to another place & see if the code moves as well..

The P1 519 is suggesting a problem with the adjustable cam timing solenoids OR gears.

david s poole 10-05-2006 12:04 PM

can you provide vin# on car?

whunter 10-05-2006 12:06 PM

Hello Kevin
 
Your issue was caused when you cleaned the engine bay with water.
Generally one of the weather pack terminals is missing a seal, allowing water to enter and short the terminals.

If you are very lucky, you will find which one, clean and dry it, and the issue will be gone.
However, electrical circuits do not like shorts, there may be secondary damage.

Here is another possible issue:
MB Wiring Harness Failure
http://www.peachparts.com/shopforum/showthread.php?p=927185

mgtd2000 10-05-2006 12:52 PM

Vin #WDBGA51GXVA362xxx

Thanks
Kevin

mgtd2000 10-05-2006 12:56 PM

Thanks whunter, I am going out now to check all electrical connections in the engine bay.

Kevin

5280BENZ 10-05-2006 02:50 PM

PO300:Random/Multiple Cylinder Misfire Detected
PO304:Cylinder 4 Misfire Detected
:dizzy2:

mgtd2000 10-05-2006 03:45 PM

I switched the coil 4 with coil 1, cleared codes and it now reads P0301 which is a misfire in #1 cyl. I have ordered a new coil from our host. I hope to get it tomorrow. I will keep everyone updated. Thanks for all your help, I believe I'm on the right track now.

Thanks again
Kevin :laugh2:

mgtd2000 10-06-2006 11:03 PM

Well, Great news, I received the coil from our host today and YEAH!! The car is back to normal. Thanks for all your advise, I will post pictures of my baby tomorrow.

Thanks Again
Kevin


All times are GMT -4. The time now is 01:56 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website