![]() |
Voltage regulator on 300 CE
Can anyone tell me where the voltage regulator is located on a 1991 300 CE coupe?
Antonino |
It's at the back of the alternator. Disconnect the car's battery, remove the 2 Philips head screws at the back of the alternator, then extract the voltage regulator. Usual failure is the brushes get too short to make good contact with the armature. You can tell because the brush contacting face will not be shiny.
Sixto 93 300SD |
voltage regulator on 300 CE
Can anyone tell me where the voltage regulator is located on a 1991 300 CE coupe?
Thanks, Antonino |
Voltage regulator on 300CE
Dear Sixto, thanks for your help.
Antonino |
Oops, I told him in the another thread it's in the alternator, accessible from the back side of the alternator. Is it different in this car?
Sixto 93 300SD |
Nope, you're right, I read it as "blower motor regulator" for some reason.
Gilly |
All times are GMT -4. The time now is 06:44 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website