![]() |
|
|
|
|
#1
|
|||
|
|||
W126 Climate Control
83 300SD
I can't get the AC to blow cold air only hot. I've replaced the monovlave and every once in a while everything will work great and the AC works fine. But these occasions are getting further and further apart. I can punch buttons and get it kick on the AC, but after a while its back to hot air. The climate control unit will constantly click, click, click click by itself at about 3 times a second. I recently bought a used climate control unit off of Ebay and took it apart and inspected all of the solder joints (whick looked good) and it does the exact same thing. Did I buy another broken climate control or is there something else causing the thing not to work properly? |
#2
|
|||
|
|||
Wrong pressure of AC coolant?
Hi,
my guess is your coolant pressure is low, did you check? |
#3
|
|||
|
|||
Yea the coolant is fine. The car will blow cold air sometimes and then switch to hot. Just like your moving the temperature wheel.
|
![]() |
Bookmarks |
|
|