Anyone fixed this problem before?
 

The vinyl surrounding the seat belt height adjuster has come unglued. Anyone had any luck fixing this before? I took a look behind the vinyl and it looks difficult to reglue without taking everything apart. I'd rather not have to take the whole pillar apart. I'm afraid I would create more problems than I would fix.

You have to take the pillar cover off to glue it back.
There are two screws holding the plastic cover (under he pillar cover), remove these and take the plastic cover off. The pillar cover comes off if you pull it downwards.

i have just used 3m upholstery glue spray... and tucked it back in....

Thanks. I think I'll try the upholstery glue spray first and if that doesn't do it I'll take off the pillar.