|
|
|
#1
|
||||
|
||||
420 radiator change out
Gentlemen: I'm in the process currently changing my radiator. I need to know rather quickly what the two screw in lines at the bottom of the radiator are. Maybe to the transmission? If so can they be backed out and reconnected to the new radiator without any problem? Thanks, Dave Bunker
__________________
Dave Bunker 1987 420SEL, 180k strong Blu & Grey 2004 Road King Custom Sacramento, CA tvbunk@comcast.net |
#2
|
||||
|
||||
yes and yes. they are not under pressure but some tranny fluid might leak out. you could put plastic with a rubber band over the end to hold as much as possible in.
tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|