Ok partner, will get to work in the AM. good night.j-n-t

Well I started on the car again and made a wire connector for the EHA. This
harness is made with male and female fittings to plug in at both ends of the
EHA and harness,made up a wire so I could place meter in series. My first reading I got 4.25 cold warm -7.47 running temp. -9.87 this was on a digital
meter.I backed the allen screw ccw 1/8th and got 3.89, I then reopened the
EHA backed off (ccw),1/8 more now it will only hit long enough to burn off the cold start shot of fuel,I have gone up and down as much as 12 full turns will not stay lit so I have missed the mark at the fuel mix how do I find that
spot to make it run?