|
|
|
#1
|
|||
|
|||
W126 - What is this Hose
Can any member help with identifying one of the rubber hoses on a 500/560SEL? Looking from the front of the engine. On the left bank below the air cleaner is the air intake rail for the left hand fuel injectors. (Yellow plug at both ends with four injector connectors) Running off a yellow junction joiner in the centre is a black rubber hose of the same diameter that exits for an inch before bending at about a 40 degree angle towards the rear of the engine to dissapear under and connect to the underside of the Fuel injection assembly. Merc Dealership does not list this part and has supplied all other hoses. I can't find a part number on the old hose. It was rubber in its former life, however has now turned to something resembling plastic or steel!
I don't want to remove it as it will break and am terrified what brittle part it may connect to under the injection assembly. Any help wiith what this part is called or a part number would be appreciated. What does this hose connect to under the injector assembly? Is it a metal connection or another scarey old brittle rubber connection. Just need to know if it can be removed without breaking what its connected to. Any information or advice would be appreciated. |
#2
|
|||
|
|||
Quote:
Brian. 280SL 500SEL |
#3
|
|||
|
|||
your y hose number is 116-090-08-82.it used to be available as two pcs but now only as one pce.it comes off the idle air plenum which is fed by the idle valve and feeds air to both of the long tubes,it doesn't connect under the fuel distribution plenum,so you can feel safe about removing it.
__________________
David S Poole European Performance Dallas, TX 4696880422 "Fortune favors the prepared mind" 1987 Mercedes Benz 420SEL 1988 Mercedes Benz 300TE (With new evaporator) 2000 Mercedes Benz C280 http://www.w108.org/gallery/albums/A...1159.thumb.jpg |
Bookmarks |
|
|