![]() |
Fuel Injectors Leaking?
Greetings to all. This is my first post in this forum.
I have a 1992 400E and I smelled gasoline in the cabin the last time I used it (last week). I thought that it's from another car in front of me. This past weekend, I decided to remove the air filter housing and started the car to see if there indeed is a leak somewhere. I was working alone so after starting the car and stepping out to look into the engine bay, there was already a pool of gasoline directly below the second injector from the front, on the driver's side. That injector was very wet but I did not see it spray out the fuel. The injector in front of it was also wet around the middle part of it, but not as wet. I assumed and am assuming that leak came from the injectors. How hard is it to replace the o-rings on these injectors? Can someone please share the procedure? What's the likelihood that it's not the just the o-rings, but the injector themselves needs replacing? I'll check again this weekend with someone else starting the car and with me watching the injectors. And I appreciate any assistance and thanks in advance. Mario |
Easy
The trick is to lube the O-rings and fuel rail/intake manifold holes with clean engine oil.
Total time = one hour or less for me. :) PART NUMBER SEARCH RESULTS WITH PRICES Vehicle 1992 Mercedes Benz 400E Part: Fuel Injector Seal Note: lower C1010-16838 Fuel Injector Seal Bosch IN STOCK C1010-50449 Fuel Injector Seal IN STOCK Have a great day. |
All times are GMT -4. The time now is 08:58 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website