Power seat trouble
 

The passenger seat on my '88 300CE works in all areas except it will not work in the down position. It seems to be stuck with the rear all the way up so people have to sit with their rear end almost above there knees. Would this be a motor issur or a switch issue?

Thanks.

Nevermind, I squirted some WD-40 in the switch area and worked around the switch controls. It must have been pretty gummed up but it seems to be working intermittenly now.

Power Seat
 

1984 300d Turbo 143,000
On A 1984 Olds It Was The Two Inch Plastic Coupling, Motor To Seat
Gear Box $6.50 From Gm Three Small Bolt Screws To Remove Motor
Under Seat