![]() |
Is this a DIY project?
On the Pass. side of the Trans. is the Kickdown Solenoid Switch. I replaced all 3 O rings and i still see a leak. I think it is coming from the Push Start Thingy just above the Kickdown Solenoid. I was told that there is an O ring that may be leaking.If i remove this,will things come flying out ,or is it safe to just remove and replace the O ring?
|
Anybody!
|
Need more time - you only gave us an hour and twenty minutes.
|
Quote:
|
Quote:
|
Bump
|
Bump
|
Quote:
|
Quote:
|
1 Attachment(s)
jpg.gif Trans.eak-1.jpg (58.5 KB)
Hope this works! |
Picture included.
|
There is no "push start thingy" on those transmission, although there is a output driven secondary pump. It's not there so you can pushstart, although you can.
Check with a transmission shop, it may be worth your time and money for them to do it right. Peter |
Quote:
|
All times are GMT -4. The time now is 09:31 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website