I have finally got around to replacing the worn out links in my rear suspension. I have first replaced the camber strut # 124-350-77-06 and 129-350-04-06 and thrust arm # 124-350-01-29 that do not have eccentric adjusting bolts. I will replace the rear axle tie rod # 124-350-01-53 which has an eccentric mounting bolt. But the other link the Rear control arm strut (the one forward of thr camber strut) says in the Haynes manual that it has an eccentric adjusting bolt. It does not appear that mine has an eccentric adjusting setup on this link. It appears as the only adjustable link is the rear thrust arm. Does this seem correct? Or did someone replace parts and not put an eccentric back in the car.