Car will turn over but will not start. I pulled a plug wire off ...no spark. I do have fuel pressure, just will not start???? Any help is greatly appreciated gang!

P.S. Have a GOOD battery as well.

Thanks !

I'm afraid it's the EZL module. But not 100% sure.

__________________
Master Computer Engineer, A+, Network+, MCP/MCSA/MCSE 4/2k/2k3 - Messaging, MCTS, MCITP, MCT, Brainbench, ICDL and starting Ph.D

380SE 1984 <------- Totaled by flipping accident
300SE 1988 <------- Sold
Volvo S70 2000 <---- 4 family
Opel Omega 2002 <-- 4 family
560SEC 1989 <------ Sold
560SEL 1990 <------ Sold
560SEL 1991 <------ 4 my mother
560SEL 1989 <------ Sold
600SEL 1992 <------ Current

http://search.ebay.com/_W0QQsassZkhazenzcc

can i test it? where can i get it, how much

thanks

Did you try locking and unlocking the doors from the outside?

__________________
Chuck Taylor
Falls Church VA
'66 200, '66 230SL, '96 SL500. Sold: '81 380SL, '86 300E, '72 250C, '95 C220, 3 '84 280SL's '90 420SEL, '72 280SE, '73 280C, '78 280SE, '70 280SL, '77 450SL, '85 380SL, '87 560SL, '85 380SL, '72 350SL, '96 S500 Coupe

Modules are $$$....can't really test it unless you happen to have a known good spare sitting around.

I do send them off for testing from time to time...But these cars are known for eating their modules (Mercedes decided to not fuse them for some daft reason) . I can't remember if by 94 you still had 2 or if they had consolidated to 1 EZL.


Jonathan

__________________
Blue Ridge Mercedes
Jonathan Hodgman
http://www.blueridgemb.com/
Enthusiast Service, Restoration & Tuning.
Follow Us on Facebook!
Located in the Atlanta area
Specializing in all pre and post merger AMG's including Hammers and DOHC M117 engines.
Mercedes Repair Atlanta

I did not hear crank position sensor ? a visit or tow to MB to read codes before throwing parts into it

Just had "Bertha" towed to the MB Dealership to have a diag. ran. Will update.

Can anyone out there load cibr about 20000000000000 to get birtha fixed. LOL