|
1996 E 320 stop light not working
Stop lights for my 1996 E 320 are not working. Fuse and bulbs are in working order. What else can be the problem?
|
Check the brake light switch and then the illumination module. The switch input goes to the module and the light are each wired individually from the module.
|
Thanks to tips from this forum, I did the brake light switch on my '98 E300 a week or so ago. Cost $17 from the dealer and took me half an hour or so to do the job. If that's your problem, it won't be tough at all.
Cheers, John |
Thanks guys...this is news to me...where is the brake light switch located?
|
Above the brakepedal.
You'll have to remove the sound insulation panel ( 3 or 4 screws ), above your feet. ;) When you get the switch removed, push & pull the plunger, to see if it sticks( in ). |
Thanks once again. I'll give it a shot.
|
| All times are GMT -4. The time now is 12:45 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website