Righty, its been a fair few months since i last posted. Had a very rough time of life during january, but things are on the up! So ive been spending time and money on the engine.

Main question i have is, are there adaptor cups/holders to fit bosch style injectors to the M117 engine? If so where do i get them from?
Ive got a set of injectors all ready to go, offered them up to the injector ports but they wobble around a bit.

To fill in those who have no idea what im doing, ive stripped down an M117 from a 560se mercedes to fit into a trike.
Ive removed all the fuel inj system and all components and am in the process of fitting a complete custom electronic injection system, run by a Megasquirt 2.
Remote oil filter, electric water pump, full DIS ignition.
ive got a couple of pics too just so you can see what ive been up to since the other post! Lots and lots of industrial thinners and dremel action!
Ever wondered whats lurking beneath the intake plenum?

Attached Thumbnails

   

__________________
Bit of T-Cut and it'll be fine....

Very cool! I'll be very curious to hear/read about your MS II conversion as well as the electric water pump!

Look forward to seeing it completed!

Jonathan

__________________
Blue Ridge Mercedes
Jonathan Hodgman
http://www.blueridgemb.com/
Enthusiast Service, Restoration & Tuning.
Follow Us on Facebook!
Located in the Atlanta area
Specializing in all pre and post merger AMG's including Hammers and DOHC M117 engines.
Mercedes Repair Atlanta