Quote:
Originally Posted by juribe2
BREWTO: we would really appreciate if you tell us how to test the vacum system without removing the airbag.  |
It's more than I can just type up here.
Basically, though, you attach a mity-vac under the hood at the firewall where the vacuum line comes in to feed the switchover block. Then, when selecting different buttons on the control unit in the dash, you check for leaks. Since you know which pods are activated at each setting of the control unit, if a circuit leaks, you know which pod(s) are faulty.
05-17-2007, 08:09 PM
Hybrid Mode
