Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 06-10-2001, 01:14 AM
mrbroche
Guest
 
Posts: n/a
Help!

My 91 420SEL (98K miles) performs well except at idle. Especially during the "warm-up" period, the idle surges. You cannot really see it on the RPM gage but can see the oil pressure gage bobbing. Also, at same time I get this rough idle as well. It is not a constant rough idle but more of a twitching idle that I feel in my seat. Sometimes the idle twitch/surging gets so bad the if I am at a stop for an extended period (ie long red light), when it is time to accelerate, the engine "chugs" for a second or two and then seems to "catch" and then all is well.

I just recently had the plugs, wires, and filters replaced. The distributor was check and I was told it was fine. The put it on the scope/diagnostic machine and was told that nothing unusual showed up. I was told by one mechanic that this behavior is normal for this engine/model.
Is this true?

If anyone can give me some clues as to what to look for I would be greatly appreciated. As the least, maybe I can educate my mechanic. I would go to another mechanic but, except for this issue, he has been right on with his diagnostics/repairs.

Oh, the car is running slightly hotter than it usually does (approximately 10 deg Celsius or so).

Any assistance/advise would be greatly appreciated.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
ICV-what's it for? and can high idle hurt trans? gmercoleza Tech Help 10 11-18-2004 10:16 PM
'83 380 SL fast idle problem Dorbell Tech Help 3 08-23-2004 09:25 PM
380 Idle Control Valve Test ctaylor738 Tech Help 5 01-23-2004 01:33 PM
my low, rough idle, stall, hot /start solution: E320/300 rvenerac Tech Help 3 11-20-2003 09:59 AM
380SEC idle problem confusing me-help please Michael Bushnell Tech Help 2 05-20-2000 09:18 PM



All times are GMT -4. The time now is 09:00 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page