|
|
|
|
|
#1
06-18-2007, 08:25 PM
|
|||
|
|||
|
Low Beam ON when breaking
An unusual behavior started yesterday: when I brake the brake ligths come ON but in addition the pasager site low beam comes ON as well. It is a 99 E300TD with quite some miles on it. Did you encounter this type of problem? I forgot to mention that every time I brake Lamp Not Functioning warning appears in the dashboard, and if I press R to clear it comes back again when I brake. However, the warning doesn't appear when I turn the key in ignition twice and then brake. Any suggestions on how to fit it?
PAT
__________________
pat201 
|
|
#2
06-19-2007, 08:52 AM
|
|||
|
|||
|
First try disconnecting the tail lamps 1 at a time & see if there is feed back thru that lamp..if not then
The headlamp switch on that car is a computer..may be feeding back into the wrong circuit.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
|
#3
06-19-2007, 01:50 PM
|
|||
|
|||
|
MB Doc,
Thank you for your feedback. I did as you suggested without any success. One more thing - after I turn the engine off and shut the door, the courtesy lights (rear turn signals + brakes + high mount in the back + front turn signals + fog lights + low beams) come ON for about 30 seconds, although I had lights OFF while driving. Quite strange don't you think? PAT
__________________
pat201
|
 |
| Bookmarks |
|
|
Linear Mode
