PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   Part number needed (http://www.peachparts.com/shopforum/showthread.php?t=192153)

smharr4 06-24-2007 12:03 AM

Part number needed
 
Does anyone know the part number of the black steel bracket that the belt tensioner arm (103 200 02 36) bolts through, and is attached to the back of the power steering pump? I may have tightened the tensioning nut overzealously and appear to have deformed the hole in the top of the steel bracket.

Alternately, is the newer style of M104 belt tensioner (I believe 104 200 08 70) fittable to retrofittable to pre-July 1993 M104's? The mounting holes are on the water pump and power steering pump, not on the engine block - would those need to get replaced in order to fit this new tensioner? This newer style looks easier and simpler to work with than the current one I have.

Benztech 06-24-2007 12:51 AM

Heres a Number for that bracket if its a 124.030 300E
103 202 14 40 replaces (old # 103 200 06 40)
dont know if you can install later version tensioner Tim


All times are GMT -4. The time now is 06:43 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website