Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-23-2007, 01:39 PM
biobenz617's Avatar
Registered User
 
Join Date: Jan 2006
Location: Denver, CO
Posts: 180
stalling 560SEL

I have a 1990 560SEL that has an issue with stalling at idle. It only happens when the engine bay is up to operating temp and the car is restarted after a short stop. It starts and then within seconds dies. A little cranking gets her running again and no problems follow on the road.

Could this be the idle air valve sticking? The last time this happened, I pressed the pedal down 1/2 way to bypass the idle air valve and cranked, but still took a few seconds to start so I'm wondering if it is fuel related instead.

It has a somewhat rough idle with 250k on the clock (power balance test showed one or two cylinders a little low), but all maintenance has been done including timing chain/tensioners/guides/cam sprockets, except valve job. Runs about 80-90C.

Thanks,
__________________
Dave

2002 Audi S6 Avant
1983 300D
1984 300D (sold)
1990 560SEL (sold)
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:30 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page