88 560SEL which trailing arm bushings to get? - PeachParts Mercedes-Benz Forum

wawago · #1 08-01-2007, 09:36 PM

Hi, I have an 88 560SEL with low rear ride height. From the forum this is a very common problem for the aging w126. Possible solutions are to replace:
1. L and R subframe bushings
2. L and R trailing arm bushings
3. L and R spring spacers
4. possible L and R springs

I believe the ride height problem for my car is due to the first two items.

I have bought two subframe bushings already
but for the trailing arm bushings do I need four for my car? One for each corner or two for each corner? Can I just install the rear two? Lastly, there seems to be two types of trailing arm bushings: regular L2006-27454 and with eccentric interior bushing L2006-16072. Which one should I get?

if anyone knows the link to detail trailing arm bushings replacement it will be greatly appreciated. Thanks

Rick

BENZ TEK · #2 08-02-2007, 05:11 AM

Quote:

Originally Posted by wawago

Hi, I have an 88 560SEL with low rear ride height. From the forum this is a very common problem for the aging w126. Possible solutions are to replace:
1. L and R subframe bushings
2. L and R trailing arm bushings
3. L and R spring spacers
4. possible L and R springs

I believe the ride height problem for my car is due to the first two items.

I have bought two subframe bushings already
but for the trailing arm bushings do I need four for my car? One for each corner or two for each corner? Can I just install the rear two? Lastly, there seems to be two types of trailing arm bushings: regular L2006-27454 and with eccentric interior bushing L2006-16072. Which one should I get?

if anyone knows the link to detail trailing arm bushings replacement it will be greatly appreciated. Thanks

Rick

I would try adjusting the level valve control rod to see if you can get any additional height out of the car. When it fails you will see your car sagging a lot more than usual. The linkage is attached to the rear sway bar.