|
|
|
#1
|
|||
|
|||
W201 - Hydraulic Motor Mounts?
I have a 92 190E 2.3.
I get a clunking sound when i start the car and when in drive or reverse at idle there is a lot of vibration. My best guess it that the motor and transmission mounts are bad. There are 2 types of motor mounts for this engine - Hydraulic and solid. My question - What is a hydraulic motor mount and are they better or worse than the solid-given my problem? Thank you in advance John Mlynick Shelburne Falls, MA |
#2
|
||||
|
||||
Actually, there's only one kind of engine mount, the hydraulic. The transmission mount is solid.
|
#3
|
|||
|
|||
Failied Motor Mounts
Your symptoms are classic for failed motor mounts.
The motor mount looks like solid rubber but actually has a fluid in the center. The fluid can leak out and cause the problems you describe. It is usually not possible to visually see if the mount is good or bad. |
Bookmarks |
|
|