PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   2000 CLK camber/caster/toe settings? (http://www.peachparts.com/shopforum/showthread.php?t=198075)

mheffel 08-25-2007 04:21 PM

2000 CLK camber/caster/toe settings?
 
Does anyone know the factory specs for camber, caster, and toe for a 2000 CLK430? I just want to double check my alignment this weekend.

ILUVMILS 08-26-2007 08:41 AM

The front toe spec is 0*25' (+/-10'). The rear toe should be 0*33' (+/-14'). You'll need to measure the ride height to determine the correct spec's for front caster and camber. If you're at around -0*30'/-1*00' camber, and 4*00'/5*00' caster, you're in the ballpark.

mheffel 08-26-2007 10:16 AM

Quote:

If you're at around -0*30'/-1*00' camber, and 4*00'/5*00' caster, you're in the ballpark.
Thanks ILUVMILS ... Are the above camber settings (-0*30'/-1*00') for front and rear or a range just for the front?

ILUVMILS 08-26-2007 12:07 PM

As with the front, the rear camber spec depends on the ride height. If you're in the neighborhood of -1*30' (+/-30') you're good to go. Just remember that the rear camber is not adjustable.


All times are GMT -4. The time now is 04:50 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website