![]() |
|
|
|
|
#1
|
||||
|
||||
'89 260e CA Emissions Fail w/ high NOX
CA Emissions Test Results
MPH--RPM--%CO2-%O2--HCmax-HCmeas-CO%max-CO%meas-NOmax--NOmeas 15---1520--15.0--0.1----110----54------0.71------0.18------772-----803----FAIL 25---1508--15.1--0.1----85-----28------0.59------0.16------711-----366----PASS max = maximum allowable emissions meas = amount measured Details on vehicle 1989 260e no EGR Valve (didn't come with one) Performed the following approximately 2,000 miles ago: New O2 sensor New Bosch Copper Plug plugs New Plug wires New Rotor Adjusted lambda Approximately 4,000 miles since last oil/filter change Since failing I filled-up gas tank and added Guaranteed to Pass (GTP) Currently I am 1/2 way through this tank of petrol I've read through the various threads on emissions. Any suggestions from the group before I go back for my 2nd test?
__________________
Steven 1989 260E (276K miles) 1995 E320 (50K miles) |
#2
|
||||
|
||||
Well least it was close
You might take the treport to your mechanic He can tweak it or suggest a fix. Intersting your 15mph RPM;s were higher than the 25 MPH I had the same thing though my RPM's were in the 1300's They suggest a long highway trip before maybe even running in a 1 higher or lower whatever it is gear to clean deposits... Good Luck
__________________
~Shadow~ ![]() 83 500 SEC Euro 198K |
#3
|
||||
|
||||
I heard that over inflating the rear tires since it is RWD will help a closely failing vehicle.
__________________
William ________________________________________ 1987 420 SEL - Like a fine wine only better with age |
#4
|
||||
|
||||
How does the car know the speed?
Can it be altered a bit by different wheel/tire size? Seems to me RPM no is that the rear wheels or the cam? Or does the cam revolve as aresult of the rear wheels driving it... What I am gettin gat is I got really low rpm on my car 15 & 25 mph were in the 1300 range. I;m wondering if & how that coudl affect a smog test?
__________________
~Shadow~ ![]() 83 500 SEC Euro 198K |
#5
|
||||
|
||||
For what it's worth, most NOx issues are EGR related.
|
#6
|
|||
|
|||
That's the tough part...the 260E has no provision for an EGR valve other than a untapped bung on its exhaust manifold. High NOx tends to indicate high combustion temperatures.
Because your other numbers look okay, ensure that you're running the highest possible fuel octane to ward off detonation (pre-ignition) and that it is as close as possible to 87C (thermostat opening temperature) when the test is conducted. Let us know how it goes...
__________________
![]() |
#7
|
|||
|
|||
one neat trick on a car that is that clean and close to passing is to inflate the rear tires to 45psi because on the dyno you have two bags on the tires not one and it takes power to move those bags around the wheel.from what i see of your results you could also richen up the mixture about a 1/16th of a turn.more fuel means less o2 available for making nox and you have room in your results for a little more hc and co.
__________________
David S Poole European Performance Dallas, TX 4696880422 "Fortune favors the prepared mind" 1987 Mercedes Benz 420SEL 1988 Mercedes Benz 300TE (With new evaporator) 2000 Mercedes Benz C280 http://www.w108.org/gallery/albums/A...1159.thumb.jpg |
#8
|
||||
|
||||
Quote:
__________________
William ________________________________________ 1987 420 SEL - Like a fine wine only better with age |
![]() |
Bookmarks |
|
|