![]() |
240d turn signal problems
i was driving for the past few weeks and occassionally the turn signals wouldn't work. Then at other times they would. finally a week ago they stopped working permanently. Not sure what to look for. Fuses? Vaccumm problems?
|
flashers
what year 240d? Sounds like your hazard flasher switch in the console.....but depending on the year, you may have a seperate relay...just forward of the shifter, I think?
I just replaced mine (1981) - everything is built into one unit (thus the $90 cost) and it controls everything. Lots of info on here about cleaning them out too, many times they are dirty with years of abuse. I'd check your fuses/bulbs first (vac. has nothing to do with your problem).....pull the hazard switch next....and if that doesn't work, check your grounds. This is common problem - tons of info here on the forum to guide you. |
| All times are GMT -4. The time now is 06:34 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website