|
|
|
|
|
#1
11-12-2007, 08:37 PM
|
|||
|
|||
1990 190E 2.6 Tranny leaks-passenger side
Hello, my transmission on my 190E leaks on the passenger side where a big round metal seal is located, toward the front. This seal will move in and out and is attached with a metal locking ring. What is supposed to keep fluid from leaking out, an o-ring, a gasket, or what? At first I thought it was the pan gasket but it wasn't. I do all my own work but the transmission is foreign to me. Please help. Thanks.
|
|
#3
11-13-2007, 09:57 PM
|
|||
|
|||
|
Mike, I have an old transmission that I practiced on and the spring was strong just like you said. But I can push the outer metal cover in with my finger on the tranny that is leaking, it is just that easy. Does this indicate more problems than just an o-ring? Also, is the o-ring behind the round metal cover or in front of it?
thanks for your help!!!!!!!!!!
|
|
#4
11-13-2007, 11:50 PM
|
|||
|
|||
|
Look here for picture of the spring and more info:
http://www.peachparts.com/shopforum/showthread.php?t=194128 The orange colored o-ring is in the groove in the bore around the cover. Mike
|
|
#5
11-14-2007, 10:40 PM
|
|||
|
|||
|
Thanks Mike, now how can I get a new o-ring? Where would I get the information on the transmission in order to make sure I get the proper o-ring? Like I said before, I'm lost on transmissions. Is it possible to take the old one to the parts store and match it with a replacement? Thanks again
|
|
#6
11-18-2007, 08:17 PM
|
|||
|
|||
Mike, I was incorrect about the leak coming from the front of tranny. It was leaking from the large round metal cap towards the rear on the passenger side. I removed the cover and replace the orange o-ring and bingo, the leak stopped. Thanks for all you help. Oh yeah, I did it all without dropping the transmission at all. 190e2
|
 |
| Bookmarks |
|
|
Linear Mode
