Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-10-2001, 02:59 AM
Registered User
 
Join Date: Jul 2001
Location: Las Vegas
Posts: 44
I just purchased an 1985 300CD which has suffered from a lack of TLC. I am trying to bring the car back to proper condition. I was experiencing much lower fuel milage than this car should normally have even after I had the dealer adjust the valves and do a "bunch" of other maintenance.

The lead mechanic at the Mbz dealer suggested that I take the CD to a local shop J+S Diesel to have the injection timing checked (he said that was where they sent all of their problems with diesels). This shop normally only works on big diesel trucks, but as they are the local Bosch dealer they are obligated to work on Mercedes also. (the dealer is kind of an "old grouch" even though he is youger than I am he think mbz people expect him to drop everything and kow tow to them and their schedules)

Anyway they removed and flow checked my injectors... all came out in great shape, checked compression... all cylinders were excellent, and then set the injection pump timing... here was the problem! The injection pump timing was off 6 degrees.

1-Is there anything other than stretching of the timing chain that could account for that much difference?

2-If I assume that the timing chain has stretched enough to cause a 6 degree change, how much of a problem is that? I know that it is a major disaster to have the chain break, so I have no wish of risking that. Is a 6 degree stretch an indication of imminent problem? At what amount is replacement of the timing chain called for? I have read posts of folks that have operated on the original timing chain for 300,000 miles, but I have no desire as I said to court disaster.

The dealer cannot get the car in for service for a week, so I am wondering if I should even be driving it around town. I am very new at these cars and 6 degree's sounds like a lot to me, but I would like to hear from you guys that actually know what the limits are! I think MBZ recommends replacement at 100k. This car's odometer says 153k, but I have no records as to whether this chain was replaced previously or not. The owner was apparently was having some independent shops work on the car, so they could have replaced the chain and just never bothered (or had the equipment to) reset the timing on the injector pump.

I do know that after J+S reset the timing the car drives like a different vehicle. It is now much more enjoyable to drive. I think they also tweaked the aneroid adjustment. Either one or a combination of what they did has greatly increased the bottom end and made the car much smoother.

Thanks,

Steve
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Timing chain stretch - opinions? cornblatt Diesel Discussion 1 05-30-2004 02:02 PM
OM603 timing chain installation report gsxr Diesel Discussion 3 08-15-2003 11:00 AM
Zero degrees timing chain stretch md21722 Diesel Discussion 22 04-14-2003 12:56 PM
Timing chain stretch and replacement? Chaosmosis Diesel Discussion 18 03-19-2003 06:32 PM
450SL Timing chain Stretch quist100 Tech Help 1 07-26-2002 08:51 PM



All times are GMT -4. The time now is 02:35 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page