Hi

My car difficulty driving uphill, there is a humming noise if I try to accelerate. It struggles to reach 40 to 60km/hr. I notice engine could be engine harness issue. How to remove the 3 pair of wires going into the engine?

Rgds

Attached Thumbnails

         

Here's a link for a W140 S600 rewire job. Add your car type please.

http://v12uberalles.com/articles_and_info.projects_page.htm

__________________
Regards

Warren

Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor

Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL

ENTER > = (HP RPN)

Not part of the in-crowd since 1952.

from those pics it looks like you need to check your electricals asap, also check your tranny fluid level, low atf level can give you slow take off and slow shifting to higher gear plus a humming sound from the tranny area.

Mr vehicle is C220 W202 1994, Engine 111.961 , chasis 202.022

Is the feul injection wiring harness part number 202 540 3132?

Is there a instruction how to remove this wire harness, I have now remove all bu two wires going downwards. This is a pic of what mine look like, thats a pic of a removed part from another posting.

Attached Thumbnails

 

Which is the harness diagram?

http://www.detali.ru/cat/oem_mb2.asp?TP=1&F=202028&M=104%2E941&GA=722%2E328722%2E424722%2E604722%2E605722%2E629&GM=717%2E441&CT=M&cat=520&SID=54&SGR=160&SGN=05

I also am curious about how much time is involved in the removal and replacement of the wiring harness for a 1995 C280, as a DIY project.

Any tips or special tools??

I plan to order mine from Fastlane in a few days.

Thanks

__________________
1979 300D 220 K miles
1995 C280 109 K miles
1992 Cadillac Eldorado Touring Coupe 57K miles SOLD
********************
1979 240D 140Kmiles (bought for parents) *SOLD.
SAN FRANCISCO/(*San Diego)
1989 300SE 148 K miles *SOLD