I have a 2002 CL500. The driver's window takes a long time to set after the door is closed. It takes 15 sec. for the driver's window to set, and 2-3 sec for the passenger's window to set after the doors are closed. If I press the switch on the door post (a long black switch behind the latch), the window goes up immediately. I've noticed that the self closing door feature for the driver's door holds the door in a long time, and once it "releases" the door to it's normal position, then the window will immediately rise. If I also pull on the outside door handle after the door closes, then the window will rise immediately; but left to it's automatic function, the window will not rise until the door is released, and the self-closing feature is holding the door tight too long. The passenger door works normally (about 3 sec for the entire sequence). My mechanic already change a switch, but that didn't solve the problem. Is there something else that controls these sequences that is easily repaired?
This is a great forum. Thanks for all your efforts.