|
Running engine - Video
Hi guys,
Hope everybody is well... This is the engine of a 190E 2.5-16... Is the normal noise it should make? Chain, tensioner, guides and rails were changed 5,000 miles ago... Valve clearences were recently done too... Oil used is Castrol Edge Sport 10W 60... Thanks :-) http://i29.photobucket.com/albums/c2...h_MVI_0266.jpg |
Not that noisy! Maybe a bit of valve noise, valve adjustment?
|
Its a lot quieter than our V6 caravan, thats for sure. And a LOT quieter than a 617! :D ;)
|
Valves were adjusted about 1,000 miles ago!
|
The 16V has "forged" pistons that run 0.0025-003" clearance & that is the root of 16V engine rattle, normal.
|
What was the sound after you reved it? I couldn't tell if that was the engine or wind noise in the mic.
|
That noise right at the start of the video is a van driving by really quickly! lol...
|
| All times are GMT -4. The time now is 11:30 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website