![]() |
Alarm problem in 1989 300TE
My cal alarm somehow is stuck. it stays on even after locking/unlocking the car, trunk. The car starts also, but the alarm stays on.
I removed the fuse that controls the alarm to stop the loud alarm with flashing lights. Unfortunately, the central locking and antenna are also on the same circuit, so these are disabled also. What should I be looking for? this is a 1989 300TE. thanks |
Alarm
I believe that the alarm control box is under the carpet on the floor of front passanger side, you should be able to disable the alrm from there
Hope this helps! |
That's my fix when the alarm goes wonky.
Pull up carpet on the passenger side, remove fastener, pull the plastic panel and pop the connection off the alarm module. No! No! Not the red connector! Reassemble in reverse order. Fixed! Jim |
| All times are GMT -4. The time now is 09:14 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website