I have a 2003 c320 with a code P0715. I have replaced the conductor plate but the code remains. Is there anything else that can cause this code and can I properly clear the codes with an OBD2 generic scanner?
I have checked the turbine sensor signal at the control module and it is good.

Thanks

Most likely the code in trans computer is causing your problem.

A dedicated is required to erase that code.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

Thanks for the info, I took it to a friend with a Modis and he was able to clear the code and now everything is fine.