Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-17-2009, 05:01 PM
Registered User
 
Join Date: Nov 2002
Location: Metrowest, Mass
Posts: 29
c320 changed steering lock, now I'm locked out

My 2002 c320 electric steering lock was making funny noises, so I decided to change it before it quit altogether. For the last month the lock chatters when it is locked or unlocked, in the past it was always one smooth continuous sound. And some days it chatters differently than other days.

Online EPC showed the original lock was a 203 462 06 30, and it was superseded by a 203 462 09 30. The factory replacement part appears identical to the original.

So I followed the WIS instructions which were:
1. Insert key and turn to position 1
2. Disconnect battery ground
3. remove kick panel, turn special locking bolt 1/2 turn and remove bolt
4. remove electric steering lock and disconnect cable

Reassembly was reverse.

Everything came apart and went together smoothly. After reconnecting the battery, I turned the key from "1" to "0" and removed it, expecting to hear the new lock drive to a "steering locked" position. I heard nothing. When I insert the key I hear nothing, and the key will not turn from position 0. The steering wheel is NOT locked.

I've checked that the connector is properly seated on the lock. I'm reluctant to try swapping back the old lock because I can't follow step 1 above, so I'm worried I'll make things worse (things are bad now, but I'll bet they could get worse!).

Any helpful suggestions? My pride is really taking a beating on this one. Thanks.
(Car has 105k miles)

__________________
2001 e320 wagon
2004 F350
2006 Crown Vic
Reply With Quote
  #2  
Old 04-17-2009, 10:22 PM
Gilly's Avatar
Registered User
 
Join Date: Mar 2001
Location: Evansville WI
Posts: 9,616
Without removing the new lock, try connecting the connector to the old lock, I think that will at least let you turn the key. I think the new lock has to be programmed at the dealer.

Gilly
Reply With Quote
  #3  
Old 04-18-2009, 12:11 PM
Registered User
 
Join Date: Nov 2002
Location: Metrowest, Mass
Posts: 29
Gilly - thank you! Connected the old lock, and the key turns.

Swapped in the old lock - noisy (as before) but everything works!

Funny - my WIS doesn't say anything about reprogramming, but maybe my version of WIS is before the lock got superseded to a new number, and the new number requires the reprogramming.

Thank you again! I am SO glad not to be having my car towed to the dealer to fix a repair I bungled!

__________________
2001 e320 wagon
2004 F350
2006 Crown Vic
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:01 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page