Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 06-14-2008, 05:29 AM
speeddemon2008's Avatar
Registered User
 
Join Date: Jan 2008
Posts: 31
w126 vibrations

I have a w126 300se '89.My vibrations are only in drive. When stopped I only have the vibrations at low rpm like below 600rpm, say 500-550rpm. Then all go away unless heavier acceleration. But no matter how light I am on the accelerator it vibrates starting at 30ish on up if it is under load. As soon as I let off the pedal the vibrations go away, yes even at 80mph so no high speed vibrations like I keep seeing. Also I tend to have a horrible shaking if the right side of the car goes over a bump, the left seems to be very tight in relation. Do I need new motor mounts? Tranny mounts? Suspension parts? Any help would be appreciated.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 12:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page