Hi all,
I recently had my brake lining sensor light come on and shortly after ABS,ESP and BAS. I know that the ABS knocks out the other systems but after changing the pads and lining sensors the lights won't reset (not even the lining one) and code C1110 comes up (can''t find a description for that one with snap on scanner).I also noticed that my cruise control is not working,does this also get knocked out by ABS? Or is this part of the problem. Any ideas where to go with this next? Could this be part of that wiring harness problem that I have read about? No other running issues(yet).
Thanks
Don

Would help if I knew what car this is, but stabbing around at various C230 203 chassis coupes I found one with a C1110 fault code (third attempt first two C230s didn't have such a code). C1110 is stated to be a L6/2 (right front speed sensor) Line monitoring fault. Testing is speed signal while turning right front wheel and verifying input voltage above 11v.

__________________
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician

Thanks, I will check that wheel and let you know what I find.
-D
'02 C230 K coupe