![]() |
126 no heat...also brake ???'s
I am up in Canada and it is staring to get a little cool. Turned on the heat in my 87 560sel for the first time in a while and it did not work. The blower motor is running fine as is the AC. When I turn the temp dial down from the blue to the red, the AC shuts off, the fan keeps blowing but no heat comes out.
As well, when I come to a stop my abs light starts to flicker and the braking at a slow speed pulsates really hard. I can't feel any pulsating in the brake pedal. If I am completely stopped and press down hard on the brake pedal the abs light will come on solid. Could this be my abs sensors or a rotor issue? Any help would be great as it will be cold and icy soon. The Dude. |
Not sure on the brakes but check your mono valve for the heat. Pull the valve and see if the rubber diaphragm is split. You can buy a new rebuild kit from this site or go to a junk yard and see what you can see.
|
| All times are GMT -4. The time now is 04:03 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website