|
|
|
|
|
#1
11-19-2008, 07:52 PM
|
|||
|
|||
|
Repost: '83 380 SEL no start
Drove for roughly 4 hours, shut off at the pump, filled her up & no start but. Compression while turning over seems fine. Engine temp. was at normal operating level.
Any advise? 
|
|
#2
11-19-2008, 09:46 PM
|
|||
|
|||
|
Try starting with shifter in N rather than P.
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.)
|
|
#3
11-19-2008, 09:47 PM
|
||||
|
||||
|
If its turning over, then its not the neutral safety switch.
__________________
Adam Lumsden (83) 300D Vice-President of the MBCA International Stars Section
|
|
#4
11-19-2008, 09:51 PM
|
|||
|
|||
|
Quote:
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.)
|
|
#5
11-21-2008, 07:30 PM
|
|||
|
|||
|
What is the test for the ign. coil? How about the ohm rating of the coil resistor?
By Bently CD died!!!!!!!!!!!!!!!!!!!!!!!
|
|
#6
11-21-2008, 08:09 PM
|
||||
|
||||
|
For a quick spark test, take out one of the plugs and ground the plug housing to metal. When you crank over the engine you can see if its simply getting spark or not.
__________________
Adam Lumsden (83) 300D Vice-President of the MBCA International Stars Section
|
 |
| Bookmarks |
|
|
Linear Mode
