Fuel Hose Repair - 1995 E320

[TomLatos]

I need to replace the 2 rubber hose fuel lines that connnect the injector rails to the LH inside fender well metal fuel lines. Each line is terminated with metal fittings that look to contain hose barb ends.

The hoses are marked 8X14. Is that an 8mm ID hose?

To accomplish the R&R, can I just cut the old rubber hoses away from the original fittings and replace with new rubber hose?

I am aware that the max pressure in these lines is about 50psi.

Appreciate the advise.

284 kmiles on the clock - still my daily driver 80mi/day