Speed Signal/Parking Sensors??
 

Hi fella's,

I have searched this and many other forums that hosts tonnes of information on how to retro-fit after-market reversing sensors. In fact I'm shortly going to follow a guide from a forum which is very helpful.

One piece of information that I cannot seem to find (maybe I've missed it??) is how to take a feed from somewhere, possibly the speed signal? that will help in turning the parking sensors, including the display off whilst driving and putting them back on when I slow down again! Similar to the auto-locks on the door when I drive above 11mph. In essence, I am trying to find a "on" power source when the vehicle is manoeuvring at slow speeds then turns off whilst driving and puts back on gain when back to a manoeuvring speed.

Anyone have any ideas how to do this on a W203?

Thanks.

Andy.

I would say either power it from the backup light, or just put in a switch to turn it on and off when you need it. Any other solution will probably be much more complicated. However, some expert might have another answer.

Thanks anyhow for your advice there mpolli.

Any takers for some expert opinions?

Shoot away please......! ;)