![]() |
1990 190e 2.6l runs, just has trouble starting up!
I have 1990 190E 2.6 liter that has always worked flawlessly until about a year ago it started to act up.....
To start-up it'd take longer than usual. I'd put the key into the ignition, turn it for a good 3-5 seconds, and it wouldn't start up... But if I did back-to-back once or twice it'd fire-up then almost immediately. If I were to go anywhere in the car (after having it turned-on and running)and as long as the car's engine stayed warm, I could turn-off the car, and when coming-out of the store (or wherever it is I just happen to be at) I'd put the key in the ignition and the car would usually fire-up rightg away and start. Normally I wouldn't have a problem with it on warm days. But I did start noticing that when the climate got colder, it'd take long for the car to start, if not start at all! I doubt the heater core has something to do with it... I'll eventually replace the heater core immediately if I could get the car running again. Do you think it might be the fuel pump or something to that extent??? ANY suggestions anyyone??? Please help me! Thank you. |
Fab- this could be just about any number of different things. I'd start with the cap/rotor. How old are they? Remove the cap and inspect. Wires? Plugs? A weak fuel pump is always possible. Start with the spark first, then think fuel...
-GH |
I'm not a techie so this is anecdotal . . .
Had a similar problem with a 300E brought to Canada from Florida. Difficult starting in cold weather. Dealer replaced Voltage Protection Relay (problem solved). Problem recurred a year later due to moisture in relay. Replaced again. Starts great even at 10 below!! Hope this helps. |
All times are GMT -4. The time now is 05:27 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website