Gear shift linkage bushes 230e
 

I need to change the bush on the transmission side .The lever on the side of the tranny is not fixed with a bolt , as I understand some are . How do I change this bush as there is limited space when working under the car .

Bushings
 

I just did my 300E and my wifes 300D, and it is not easy. I had the car up on ramps, make sure you put something behind the rear wheels so it doesent roll. You can get the one under the gear shift from there. The one closer to the tranny I had to put the car in drive to get to the bushing, still tight. I put the new bushing in the microwave just enough until it is soft and then put it on the car, the one by the tranny took me a few tries. Just take your time, make sure you put something behind your rear wheels, I also used a screwdriver to help get the bushing in.