I have a 1986 300E and I need a front driver seat. I got a front seat from a junk yard, the problem is,it is the wrong color. I was just going to exchange the bottom of the new seat with my old seat and put the right color tex on it. My question is can I take the gray tex off the hole seat and put the right color on?

Yeah, you mean transfer the original covers onto this "new" seat, that should work OK.
Gilly

__________________
Click here to see the items I have up for auction at EBay

Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)

How do you do the back of the seat? I can do the bottom, just not sure where to start on the back.

Screws that hold the back cover on (down low on the cover), then the headrest, then you will see how the cover is held on looking at the back of the backrest.
Gilly

__________________
Click here to see the items I have up for auction at EBay

Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)

Thankyou, I will give it a try tomorrow.

Not as easy as I thought, Had to take a break. Cant figure how to get the rest of the back off. Lots of clips in there.