PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   What are the torque specs for valve cover (http://www.peachparts.com/shopforum/showthread.php?t=270427)

Texholdem 01-28-2010 06:39 PM
What are the torque specs for valve cover
 
I intend to replace the valve cover (in EPC called cylinder head cover). There are 15 screws in three types (1 srcew at the back, 3 between the spark plugs and 11 on the side ). What are the torque specs for them?

Thanks!

long-gone 01-29-2010 03:13 AM
I assume you're talking about the M104 in the other thread. I'm not 100% certain but I think they only get tightened to 10Nm (about 7.5 to 8 Ft-lbs).

Texholdem 01-29-2010 12:28 PM
Quote:
Originally Posted by long-gone (Post 2393413)
I assume you're talking about the M104 in the other thread. I'm not 100% certain but I think they only get tightened to 10Nm (about 7.5 to 8 Ft-lbs).
Too bad :), my big expensive digital torque wrench starts at 30 ft-lbs, need to find a smaller one. Yes, the engine is M104.980 from my 1990 300CE. Thanks


All times are GMT -4. The time now is 10:33 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website