Need help replacing door grab handles on 96 E320
 

Can anyone help w/info on how to install. I bought the parts but it looks like I have to remove the door assembly to be able to screw the top part on to the power seat housing or is the plastic piece behind the handle removable so I can get at the screw?

I know u don't have a w124 chassis but there is an article in the FYI @ this site that might shed some light.

Good luck,
Ren

C,
there are three screws holding the door panel on. You must pry the SRS badge off (I recommend using an old credit card so you don't scratch anything), one screw is behind that; one is under the trim on the door opening pull handle and I forget where the third on is but it's the easy one to find :D

Hint USE THE SEARCH!! our cars have a "W210" body so theat narrows the results. Here is a helpful thread...door panel removal W210