![]() |
|
|
|
#1
|
|||
|
|||
Front Caliper Rubbing Wheel
I replaced my front brake pads on my '88 300TD, they went on no problem, however when I put the wheel back on it drew up tight against the caliper, the wheel won't move. It seems like the pad material is just to thick. Any help or advice would be appreciated. BTW I was "financially challenged" so the rotors did not get replaced this time around. I have also beveled the edges of the new pads to clear the lip on the rotor. Thanks in advance.
|
Bookmarks |
|
|