Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 12-08-2001, 05:30 AM
David Rose
Guest
 
Posts: n/a
Question 190 E 2.6 transmission questions (long)

I have recently purchased a '90 190 E 2.6 from a family member; the car is in excellent condition overall, with only 80,000 miles, but I have some concerns and questions re: the automatic transmission.

First, I have read several posts on this and other forums about modifying pre - '91 cars to start off in first gear. After driving a '92 model and experiencing much improved acceleration, I decided this is definitely a "mod" I'd like to make, but I don't really wish to spend $1300 or more on a new valve body, especially if replacing a spring (behind one of the pistons in the valve body) is all that needs to be done. Since the car will be in the shop for transmission service (fluid flush/filter replacement/ adjustment/ repair ?), it wouldn't take much more effort to make the change. I just want to be sure that I ask my mechanic to remove the right spring (or replace with a lighter one) ! Please let me know the details of this operation...

Also, I have noticed the "delayed upshift" feature when the engine is cold; before I read the manual, I thought the trans was failing... Under minimal throttle, even at subzero temperatures, the unit holds 2nd gear to nearly 4000 RPM, and then "kicks like a donkey" into 3rd. The local Mercedes dealer assured me this condition is "normal," and since it seems it's emissions related (a clever strategy to heat up the catalyst), I could probably live with it. It would be nice (esp. for that ice cold engine!) to lower that shift point a bit, though, and if the tranny started in first, it would upshift quicker, at a lower ground speed, and wouldn't give the impression that it was stuck in second gear...

One more oddity -- while accelerating quickly (say 1/2 to 3/4 throttle) away from an intersection, usually in hot weather, the car would downshift from 2nd to 1st, sloppily, in the middle of the intersection, hold first for a couple seconds, then shift back to 2nd. Unfortunately this is the situation where a single, abrupt shift would be appropriate, and would certainly help acceleration. Is this normal, too ?

Since the car will be in for service soon, it's a good time to address all of these things. And I have budgeted for the worst case, but hopefully I can get away with adjustments rather than overhaul! Any helpful advice would be greatly appreciated.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Head Gasket help on a 190 E 2.6 DIYBenzer Tech Help 33 01-22-2003 12:32 AM
190 2.6 Eibachs for sale Tobias MB Mercedes-Benz Used Parts For Sale & Wanted 0 10-30-2002 11:10 PM
Coolant Leak near the transmission on a 1988 190E 2.6 kowached Tech Help 1 11-05-2001 12:53 PM
Transmission questions K Juul Tech Help 3 08-01-2001 10:14 PM
two questions 1991 1901e 2.6 rickh-5 Tech Help 1 03-25-2000 10:59 AM



All times are GMT -4. The time now is 11:13 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page