PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   Which Automatic Transmission Fluid? (http://www.peachparts.com/shopforum/showthread.php?t=28006)

gbradcsi 12-14-2001 12:59 AM

Which Automatic Transmission Fluid?
 
Thank you to those who replied to my past questions. i have another question: Do i need to purchase Automatic trans. fluid from the Mercedes Dealer or can i use a different brand? and which brand would you suggest for a 1993 190E 2.6
I know Mercedes does not make their own oil, but they may have different additives?

MikeTangas 12-14-2001 02:09 AM

I think regular old (new) Dextron III will be fine for this transmission.

sixto 12-14-2001 06:28 PM

As Mike says. The MB transmissions that don't use regular transmission fluid don't have an owner accessible fill port so it's not even an issue.

Sixto
91 300SE
81 300SD

vinamg 12-14-2001 08:59 PM

I would stick with the original MB fluid. I think the part number is 001-989-07-03. It's a little pricey (I think like $12-$14 a quart), but you only need to change it every 30k miles. If you decide to use the regular stuff you should change it more often.

Vin

400E 12-14-2001 09:51 PM

I switched to Mobil 1 synthetic ATF this year, since my car sits out all day and it sometimes stays below 10 degrees F here in winter. Mobil 1 meets all Dexron III specs so is safe to use.

Incidentally, it is Dexron, not Dextron. . .

stephenson 12-14-2001 10:00 PM

I have long used Mobil One auto trans fluid. Whether it was due to being new fluid (several cars experience) or improved lubricity, they all seemed to have shifted smoother and faster.

Assume yours has a torque converter? Mine (123s and 126) have all had to be drained separately ... gotta spin engine to find the drain plug. Yours may be different.

vinamg 12-14-2001 11:00 PM

Nope, it's the same procedure. You need to turn the converter until you can access the plug. Make sure to drain the converter.


Vin


All times are GMT -4. The time now is 02:48 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website