|
Removing rear W201 bumper at the junkyard
Anyone that has done this could tell me what tools would I need? I need to get a bumper off without having to carry 200lbs of tools or missing the last socket that I needed to get it out.
Any info will be greatly appreciated.. |
If I recall correctly, all you'll need is a 10mm and possibly a 12mm socket to undo the bolts on the reinforcement bar.
|
non of those 8 point allens or something weird like that? :)
|
Great thing about the W201 and W124 chassis cars . . . You can pretty much "de-bone" 95% of the car with hand tools from a basic metric tool kit.
|
two bolts from underneath, 2 from inside the trunk. super SUPER easy.
I want to say 13 or 14mm |
Yeah, I could do maybe half the car with my little MB(12mm and 13mm I think) wrench. That is until I lost it.
|
| All times are GMT -4. The time now is 12:52 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website