![]() |
1986 300 e serpentine belt --- HELP
I replaced the alternator on my 300e, in doing so I replaced the belt as well. but the diagram on the new belt is not showing the correct layout, can anyone show me a diagram , drawing or anything to show me how to re-install this?
Please help Thanks , K Smith |
Its in the owners manual for the car. I dont have it in electronic form or I would have sent it.
|
300e owners manual
I have the owners manual, but could not find the information I needed. Is it in a different section?
Thanks, K Smith |
As I recall, it is near the back of the manual. I had to look at each page to find it. It was not listed in the contents.
|
300e owners manual
I have the owners manual, but could not find the information I needed. Is it in a different section?
Thanks, K Smith |
K Smith,
He means, LOOK AGAIN... very carefully! |
I have an '86 300E. The layout of the serpentine belt is on page 86 of my owner's manual. Page 90 shows the correct belt length as 2255 mm.
Do you have enough snow yet in Utah? -Blake '86 300E 247,455 miles |
All times are GMT -4. The time now is 11:19 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website