![]() |
SLK rear window
I recently had to replace my battery when the top was retracted. I think this might have confused the position sensor on my rear window, because now when the top is up, it's not flush against the roof. There's a gap between the driver side quarter window and the roof. Is this something that I can DIY adjust?
|
|
I couldn't find any related post on slkworld, and I trust the advice on peach parts. Thanks though.
Is there an easy window adjust that I can do? I found something about putting the key to position two, and trying to put the window up. That didn't work. This seems related to the battery, so I don't think I should have to replace any parts. |
Does the rear window function correctly when you operate the top?
|
Quote:
WAY more SLK experience there than here. There is BTW, ZERO requirement in WIS for any roof adjustments following battery change. Your problem is NOT related to the battery. |
1 Attachment(s)
The rear quarter window is a self contained unit, only works with top operation.
|
MBDOC,
The rear window is raised and lowered with the roof, but not raised completely. It's actually gotten a bit worse from using the roof a little bit over the last couple weeks, and now the gap has gotten larger. There is also now a 1/4" gap between the rear window and the full driver window. |
Must be a problem with that window regulator.
|
All times are GMT -4. The time now is 01:14 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website