![]() |
Electrical Help Needed
I bummed out :( I was trying to install on of those cheap keyless entry systems to the pump underneath my seat in the back of my 300E and I must have shorted something out. Now there is no power going to the pump (I tested the + and - for 12 Volts...or less...it actually was working when I put it back together last night and then today...it stopped) and my rear seat light doesn't come on when I push the dash button for it. Actually, the front seat lights turn on??? I replaced the A fuse which controls all that stuff but still getting same result. Anyone have any ideas or where I can check next? Did I short out a relay switch or something? Please help!!! It was all perfect before this.
Update: Thought I had checked all fuses but C3 had blown. Replaced that one and all is fine again. |
I forget where the convience relay is but sounds like you beat it up. They get weak after 20 years and those after market systems dont hold system signal for 3 seconds as needed. I would try an d get the CD for the 124 and look up where the relay is.
|
All times are GMT -4. The time now is 12:49 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website